Tag Archives: pros-aide

Applying and Colouring a Foam Latex Piece.

13 May

Today I completed the final step of my fiberglass mould/foam latex piece process.

Having completed my hand and left it to set, I returned to apply it. Despite being stretched over the mould is did shrink slightly, however not too much that it couldn’t still be applied.

Being short on time and seeing as the hand had been cast from my own, I decided to just apply it to myself.  Unfortunately I’m right handed, and the piece was on my right hand; so I’d given myself a challenge.

I covered the area of my hand that would be touching the prosthetic in pros-aide, and then applied pros-aide to the piece. Once they had both become clear and tacky, I gently started from my finger tips and stretched the piece slowly over my hand. It stuck perfectly. As the edges were slightly too thick, I used pro-bondo (a thickened pros-aide) to smooth down and blend out the edges.

1491675_10154155786290722_8256613221157509973_n

Once I had done this I had two colouring options. A) Illustrator (alcohol based paint) or, B) Pax paint (equal parts of pros-aide and acrylic paint). Having had more practice with the illustrator i decided to go for this – I couldn’t seem to mix the Pax to the colour I wanted. I layered up my illustrator colour with a stiff brush, spraying the colour across my hand, I then used a thin brush to accent the shadow and highlight around my circular edges.

Overall, I think I did okay to say I was painting with my left hand only, however I think  the colour had merged a lot and was not quite as bright and inky looking as I wanted – however it does correspond to my initial design.

10364402_10154155785730722_1152674347_n

Eyebrow Blocking

29 Jan

Today as a class, in broken down groups we demonstrated to each other different ways of blocking out eyebrows; discussing the process, products and uses within the professional industry. The purpose of this task was not only to learn the obvious, but stretch our experimental abilities; questioning what was being asked of us and trying to formulate specific ways in which brow blocking worked for us personally.

I was in a group with Leanne and Emily, we split the task between us, sharing research, display and practical task. Prior to the presentation day, we did a trail run.

Despite our mistake in the size and cut of our eyebrow piece, we concluded that our process was the most successful in terms of visibility when done correctly. However, cap plastic application may not be required if dealing with a theatre production, as the detail will not be visible from far away. In reality, if dealing with a HD production, the actor would need to shave off or wax their eyebrows; as such small details would easily be recognised on the screen, rending coverup redundant.

Cap Plastic Application

Cap Plastic Application

Below you can see examples of the other groups’ work.

image48

Soap Application

image50

Wax Application

image49

Pritt Stick Application

image51

Pro-BOndo Application